Rugby Union Guide

Managing substitutions in junior Rugby Union: one app for subs, score and stats

How to run substitutions in a junior Rugby Union team without a notebook, and why parents prefer one app for subs, tries, kicks and season stats across 12 sports.

The LineUp team Published

Free to download today · No ads in the app

Get the app
A boy in a plain navy rugby jersey jogs onto a frosty club field on a misty morning, white rugby posts behind him

The simplest way to manage substitutions in a junior Rugby Union team is to stop counting in your head. Put a clock on every player, let it count time on and time rested, and let it suggest the next swap so you only have to confirm it at the next stoppage. LineUp does exactly that on the manager’s phone, and because the tries, the kicks and the minutes are recorded as you go, the result and the stats reach every parent at full time without a single message being written. This article explains why subs go wrong, what a substitution tracker needs to do, and how LineUp handles it for Rugby Union and eleven other sports in one app.

Why are substitutions the hardest part of managing junior Rugby Union?

Every other job a team manager does has a natural time slot. Replies come in during the week. The draw gets added once. Oranges and the packet of lollies are sorted by the previous player of the day. Substitutions happen during the game, at the moment your attention is most divided, with a coach beside you, a parent asking a question and a ruck forming twenty metres away.

The tools most managers reach for do not help. A notebook needs a pen, a dry page and a free hand, and rugby is a winter game. A memory needs a game without incident. The standard result is familiar to anyone who has stood on a sideline: a quiet child who spent most of a half on the bench in a jacket because no one noticed, a confident one who never came off, and a manager who felt bad about both on the drive home.

Junior Rugby Union makes this harder than most sports. A squad of fourteen or more, a bench of three or four, two halves, and changes made when the ball is dead mean a batch of swaps squeezed into stoppages, and some are not planned at all. Each one is a small decision about who has had a run and who has not, sometimes about who can pack down in the front row, and each one is made with incomplete information.

What does a substitution tracker need to do?

Strip it back and a sub tracker has four jobs.

Count time on and time rested for every player, live. Not minutes you enter afterwards. A number you can glance at while the forwards set a scrum and know that Manaia has been on for 18 minutes and Charlie has been sitting for nine.

Suggest the next swap. The manager should not have to work out who is next. The tracker proposes a player off and a player on, and the manager accepts or changes it.

Confirm a sub in one tap. If making a change takes longer than the stoppage, the tracker will be abandoned by the second game.

Record the result for everyone. Minutes, score, try scorers and kickers should be saved as part of the game, not copied into a chat afterwards.

Sometimes a player comes off hurt, and it is a nightmare swapping the subs around. LineUp allows you to do this in a few taps.

Anything beyond that is nice to have. Anything less than that and you are back to the notebook.

How does LineUp manage Rugby Union substitutions?

LineUp’s live screen for Rugby Union shows the score for both sides with the clock under it, the substitution panel, the field with your players in their rugby positions, and the bench with how long each player has rested. Everything below happens on that one screen.

Time on and time rested. Every player on the field has a bar counting how long they have played this game. Every player on the bench shows how long they have rested and how long they have been on. Both update every second. You scan the list and you know.

The rotation. When you open the substitution panel, it is already filled in: Off, the next player in the rotation, and On, the player who has rested longest. The rotation puts every starting player in a random order, each comes off once before the cycle starts again, and the order reshuffles for the next cycle so the same child is not first off every week. Under the pair, Next subs shows the following two or three swaps, which is what you want at half time.

One tap to confirm, one tap to change. Tap Make sub and the swap is done. The player going on takes the position of the player coming off, the field diagram updates, the bench updates, and the player who came off starts resting. If the coach wants a different name, tap it and pick someone else before you confirm. LineUp suggests. The coach decides.

The front row. The rotation suggests by turn and rest time, not by position. If the next player off is a prop or the hooker and your grade has contested scrums, tap the On name and choose someone the coach wants there, or swap positions on the field diagram after the sub. LineUp does not check your grade’s front row or replacement rules.

Half time in three taps. Say you have ten on the field and four on the bench. Tap End H1. The break screen shows the score, the bench with rest times, and the first suggested swap. Make sub. The panel reloads with the next pair. Make sub. Then the third. Three taps, three changes, and the field shows the new ten in position. Start H2 when the referee is ready.

Late arrivals. A player who said they were coming but is not there at kick-off sits in an absent list. When they arrive, tap Mark arrived and pick their name. They join the bench and their rest clock starts.

The clock keeps running. Tap it to pause while a player is treated, and again to restart. Lock your phone, take a call, put it in your pocket. The game keeps counting and resumes where it was if the app is closed.

What do parents see, and what do they stop asking?

This is the part of substitution management that is easy to forget. The manager’s problem on Saturday is the sideline. The parents’ problem is Saturday night, when they want to know how it went, who scored the tries and how long their child was on.

In LineUp, the live screen is the manager’s. Parents see the fixture, the venue and their own reply during the game. At full time, LineUp asks the manager to end the game and, if the team picks a player of the day, to choose one. Then it saves the summary: the result, the scorers, player of the day, and minutes played for every player who was there.

That same summary is the page a parent opens in their own app a few minutes later. Nobody typed it. Nobody posted it to a chat. The manager’s job ended when the referee blew for full time.

What parents stop asking, in roughly this order: which ground, what time, did we win, who scored, how long did he play. All five are answered on the game’s page.

Does the score and the stats need any extra admin?

No, and this is the point of running subs and score in the same place. In most teams the manager tracks subs one way, scores another and the stats a third, if at all. Each one is a separate piece of admin and the last one usually does not survive the season.

In LineUp, with the Standard scoring rule, each side has its own buttons under the score: Try 5, Con 2, Pen 3 and DG 3. When your side goes over, tap Try 5 and the app asks who scored, with the players on the field listed first. Pick one, or dismiss it if you did not see. When the kick goes over, tap Con 2 and it asks “Who kicked the conversion?”. Tap the other side’s buttons when they score. Undo takes the last score back off the board and off the player it was credited to, for the try the referee calls back. Under the Junior rule, each try is one point and a tap on your side’s score adds it.

Because the try, the kicker and the minutes are recorded during the game, the stats build themselves. On the team screen the season so far adds up: the record, the points and who scored them, the players of the day. Minutes played across the season are there for the manager as a quiet hint, with no target and no colour-coding. There is no spreadsheet to update on Sunday and nothing to send.

Why does one app for 12 sports matter to a family?

Most junior sports families are not one-sport families. The child who plays Rugby Union in winter plays touch or cricket in summer. A sibling plays netball. A parent manages one team and is a sideline parent for another.

Each sport in New Zealand and Australia tends to come with its own system: the union’s registration platform, a match-day app for the competition, and whatever the manager chose for the group. A family with two children in three sports can be in six apps and four chats by April.

LineUp runs football, netball, basketball, Rugby Union, Rugby League, touch, hockey, cricket, AFL, Water Polo, softball and tennis in one app. Each team is set up for its own sport, with its own clock, its own scoring and its own game-day screen. The cricket team has a ball-by-ball scorebook. The softball team has an innings scoreboard. The netball team has quarters and bibs. The Rugby Union team has the substitution panel described above, with tries and kicks on the scoreboard. The parent switches between them in the same app, with the same invite-code join and the same In or Can’t make it reply.

For the manager who runs two teams in two codes, that means one way of working all year rather than relearning a new app every season.

How do you set it up before Saturday?

Setup takes about ten minutes and is worth doing in one sitting.

  1. Create the team and choose Rugby Union. Check players on the field, halves and minutes per half against your grade. Set the team colour and add the club logo if you have it.
  2. Choose the scoring rule. Standard has a try, conversion, penalty and drop goal. Junior is tries only, one point each.
  3. Add the roster. Every child’s name, once. Parents attach themselves to these entries when they join, so you do not need any parent details to start.
  4. Add the games from the draw with venue and kick-off time. Add training once and set it to repeat weekly.
  5. Turn on what your team does. Player of the day, snack duty, or neither.
  6. Share the invite code. Paste it wherever the parents already read. Each parent joins, finds their child on the roster, and is done. Children do not have accounts.

How your team gets on LineUp is three steps. From there the fixture reminds people the evening before, and on Thursday you can see who is in.

A few things managers ask

Does the rotation judge anyone? No. It shows minutes and offers a turn. It never scores a child’s game time, never tells the coach who deserves to play, and never shows parents a verdict.

Can two of us run it? Yes. A second parent can manage the team, and whoever is on the sideline runs the game from their own phone. The season record is the same for both.

What about an injury? Sub them off like any other change: tap the Off name, pick the player who is hurt, and Make sub. Their time on stops and the player going on takes their position. If they cannot go back on, tap the On name when they come up and pick someone else.

Can I ignore the suggestions and sub however I like? Yes. Tap either name, pick anyone, confirm. The clock and the record work the same whether you follow the rotation or not.

If you want the full Saturday walkthrough, Scoring and subs for junior rugby union in LineUp covers the positions, the clock, the scoring and the summary step by step. If you are still choosing an app, Best app for managing a junior rugby union team in NZ and Australia sets LineUp alongside Rugby Xplorer, Rugby Match Day, Sporty and Stack Team App. Everything we have written about Rugby Union is here. And if you run a club with several junior rugby teams, get in touch.

Questions people ask

What is the easiest way to manage substitutions in junior Rugby Union?
Use a clock that counts time on and time rested for every player, and let it suggest the next swap. LineUp does this on the manager's phone. You tap to confirm each sub at the next stoppage, and the minutes are recorded for you.
Does LineUp tell the coach who to sub off?
It suggests. The rotation offers the next player off and the longest-rested player on, and you can change either name before you confirm. It works by turn and rest time, not by position, so the coach still decides who goes into the front row.
What happens when a player comes off injured?
Tap the Off name, pick the player who is hurt and make the sub. Their time on stops, they move to the bench and the player going on takes their position. If they are not fit to go back on, pick someone else when their name comes up as the next player on.
How do the tries and kicks get shared with parents?
When you tap a try or a kick in the live screen, it goes on the board and is credited to the player there and then. At full time the result is saved to the season and every parent on the team can open it. There is no second step.
Can I use LineUp if my child plays Rugby Union and another sport?
Yes. LineUp runs 12 sports, including football, netball, basketball, Rugby Union, Rugby League, touch, hockey, cricket, AFL, Water Polo, softball and tennis. Each team sits in the same app and you switch between them.
Is LineUp free?
LineUp is free to download today on iPhone and Android. There are no ads and children do not have accounts.

Related guides

Ready for Saturday

Start with one team and one season. LineUp keeps the fixtures, the replies and game day in one place, so Saturday runs itself.

Download on the App Store Get it on Google Play
Scan to download

Free to download today · iPhone and Android · No ads in the app

A pair of football boots
A whistle on a lanyard
A football
A stopwatch
A rugby ball
A plate of half-time oranges
LineUp home screen with the next game

Get your Team on LineUp

Download on the App Store Get it on Google Play

Free to download today
iPhone and Android · No ads in the app