How LineUp runs a junior softball game: innings, outs and the batting order
A junior softball game in LineUp: the batting order, the count, your runners on the bases, who fields where each innings, the run limit, and a line score at the end.
In LineUp, a junior softball game is a batting order, a diamond showing who is fielding where, and a scoreboard that counts runs and outs for every innings. You set the order and the first innings’ positions before the first pitch, then call the game as it goes: Ball, Strike, Walk, Out and Safe for your batters, and Out and +1 Run for theirs. LineUp keeps the count, shows your runners on the bases by name, changes sides at three outs or at your grade’s run limit, tells you who is up and who is on deck, and builds the line score as you go. At full time the result, the run scorers, player of the day and every player’s fielding positions are saved to the season.
What does softball game day look like in LineUp?
Three screens, in order. The setup, where you choose who bats first, the batting order and the first innings’ fielding. The live scoreboard during the game, with the line score at the top. And the game’s summary after the last out.
There is no game clock. Softball is played by innings, so LineUp counts the game in innings, runs and outs instead of minutes.
A Softball team in LineUp defaults to nine in the field, five innings, a five-run limit per innings, and everyone bats. All of those are in team settings:
- Innings, from 3 to 9.
- Run limit per innings, from 1 to 20, or none.
- Everyone bats, on or off. On, the whole squad bats in order. Off, only as many bat as take the field.
- Players on the field, nine, or ten for grades that play a rover.
The positions on the diamond are the ones softball uses: Pitcher, Catcher, First Base, Second Base, Third Base, Shortstop, Left Field, Centre Field and Right Field, plus a Rover in shallow right-centre when you field ten.
Before the game
The draw is already in. You added the season’s games once, with the diamond as the venue, and any training repeated itself to the end of the season. Each fixture has a map, and families can add it to their calendar.
You know who is coming. Parents tap In or Can’t make it on the game, and LineUp sends a reminder the evening before to anyone who has not replied. With nine to field, you want to know on Friday whether you have them.
Families joined with one code. You shared the invite code from LineUp, and each parent joined with it. Children do not have accounts; you add the player names. How a team gets started takes three steps.
Setting up the game
On the day, open the fixture and start game day. The setup screen has three parts.
Who bats first. The home team usually bats second, so a home game starts with They bat first selected and an away game with We bat first. Change it if the toss or your grade says otherwise.
The batting order. Everyone on the roster is listed in order. Use the arrows to move a player up or down, or mark them away. With Everyone bats off, the players below the fielding number show as not batting.
Fielding for the 1st innings. Each position lists who is playing it. Tap a position and pick a player; if that player was somewhere else, the two swap. Anyone not placed is on the bench. If a player’s usual position on the roster is a softball position, LineUp starts them there.
Tap Play ball and the scoreboard opens.
The live scoreboard
The line score runs across the top: one column per innings, a row for each team, and the runs total at the end. The innings in play is highlighted. An innings that has not been batted yet stays blank, so you can read the game at a glance.
The innings in play sits under it: which innings it is (“3rd innings”), who is batting, three dots for the outs, and the runs so far against the limit (“2 of 5 runs”).
When your team bats, LineUp shows who is at bat, with their number, who is on deck, the count, and a diamond with each runner’s name on their base. Five buttons do the work:
- Ball and Strike: the count. The fourth ball is a walk and the third strike is an out, so LineUp does both for you. For a foul, tap Strike, unless the batter already has two.
- Walk: the batter goes to first. Only a runner who is forced moves up, so a walk with the bases loaded brings the runner on third home.
- Out: the batter is out. The runners stay where they are.
- Safe: the batter reached base. LineUp asks how far they got: 1st, 2nd, 3rd or a home run. A home run scores the batter and everyone on base. Otherwise, if anyone was on base, it asks where each runner finished: a base, Home, or Out. It starts from everyone moving up as far as the batter did, which is usually right, so most of the time you just save.
Tap a runner on the diamond for anything that happens between batters: a steal, a passed ball, a tag-up after a catch, or a runner caught stealing. The batter stays up and the count stays as it was.
Every run comes from a runner crossing home, so every run is credited to the player who scored it, with no extra question. Two rules worth knowing: runs on the play that makes the third out do not count, and if one play would take your side past the run limit, only the runs up to the limit count, lead runner first.
When the other team bats, there are two buttons, Out and +1 Run, and the diamond shows your fielders in their positions. Their batting order and their runners are not kept: LineUp only counts their runs and outs.
Changing sides
At three outs, or when the batting side reaches the run limit, LineUp ends the innings and the other side bats. A short note says why: “Three outs. Change sides.” or “That is the run limit. Change sides.”
If the umpire ends an innings early, or the time cap is up, tap End this innings at the bottom of the screen, twice, and LineUp changes sides with the score as it stands.
Undo takes the last call back, whole: a ball, a walk, a safe and everything the runners did on it, or the end of an innings. If you undo the out that ended an innings, you are back in that innings with two outs and the runners back on their bases.
Who fields where, innings by innings
At the start of each innings your team fields, the diamond carries a reminder to check who is fielding where before the first pitch. Tap Change positions for the list of positions. Pick a player for any of them and they swap with whoever was there. The change is saved for that innings only; the innings before keeps its positions, and the next innings starts from this one.
That makes it easy to rotate players through the infield and outfield across a game, and the summary afterwards shows exactly where everyone played.
How does the game end?
LineUp ends the game in the three ways softball does:
- All innings played. After both teams have batted in the last innings. A tie stays a tie: there are no extra innings.
- The home team is ahead after the visitors’ last innings. The home team does not need to bat again, so it does not.
- A walk-off. If the home team goes ahead while batting in the last innings, the game ends on that run.
The result card says which it was, with the final score. Once every innings has been played, the bottom button becomes End the game.
Out of time? Junior games are often played to a clock. Between innings, and only then, a Game called on time button sits under End this innings. Tap it twice and the game ends on the score as it stands. The innings not played stay blank in the line score, and the result card says “Called on time after the 3rd innings”.
A worked example: three innings
Say your team is away and bats first, with a three-run limit. Mia, Leo, Ruby, Sam, Ava and Zoe are batting, in that order.
1st innings, you bat. Mia works the count to two balls and a strike, then hits to first base: tap Safe, then 1st. Her name goes on first and Leo is up. Leo hits to the fence and Mia runs all the way home: tap Safe, then 2nd, and set Mia to Home. LineUp says “Mia scored.” Leo is on second. Then three outs, and the scoreboard changes sides. You lead 1–0.
1st innings, they bat. Their batters score three runs. At the third, LineUp says the run limit is reached and changes sides. You trail 1–3.
2nd innings, you bat. Zoe is up, because the order carried on from where it stopped: Ruby, Sam and Ava made the three outs in the 1st. Three quick outs.
2nd innings, they bat. The diamond shows the reminder for the new innings. You tap Change positions and move Ava to Pitcher; whoever was pitching moves to where Ava was. Three outs, no runs.
3rd innings, you bat. Your batters score twice: 3–3. Three outs.
3rd innings, they bat. They score once with one out. They are the home team and they have gone ahead in the last innings, so the game ends: lost 3–4, a walk-off. Tap End the game.
Full time
Tap End the game, twice, to finish. If your team picks a player of the day, choose them so the award is saved with the result. The game’s summary shows the result, the line score, and the scorers: each player’s runs. Managers also see fielding, every player’s position innings by innings, or “Batted only” for someone who did not field.
On the team’s season stats, the scorers list is headed RUNS SCORED, and managers see innings in the field for every player across the season, lowest first. That is where you see whether someone has spent the season on the bench.
LineUp keeps the team’s own score. It does not send results to any official competition, so if your association asks the team to submit the score, do that as well.
A few things softball managers ask
Can I use it for T-ball or coach pitch? Yes. Set the innings and the run limit to match, and turn on Everyone bats. If your grade does not call balls and strikes, skip those buttons and just tap Safe or Out for each batter.
What if a player has to leave early? Change the fielding for the next innings without them. They stay in the batting order, so when their turn comes, record it the way your grade’s rule says; many grades call it an out.
Does LineUp know the rules of softball? It knows the innings, the outs, the count, forced runners on a walk, the run limit, the batting order and how a game ends. It will not let two runners finish on one base, or a runner pass the one ahead. Everything else stays with the umpire.
Can two of us run game day? Yes. Another parent can manage the team with you, so whoever is at the diamond runs the scoreboard.
If you are still choosing an app, Best app for managing a junior softball team in NZ and Australia sets LineUp alongside Sporty, revolutioniseSPORT, iScore and GameChanger.
More on softball is here, and if you look after a club with several junior softball teams, get in touch.
Questions people ask
- Does LineUp keep a game clock for softball?
- No. Softball is played by innings, so LineUp counts runs and outs for each innings instead. You set the number of innings, 3 to 9, in team settings.
- Can LineUp stop an innings at our grade's run limit?
- Yes. Set the run limit per innings in team settings, from 1 to 20 runs or none. When a side reaches it, the innings ends and the other side bats.
- Can LineUp end a game when time is up?
- Yes. Between innings, tap Game called on time, twice. The game ends on the score as it stands, and the innings not played stay blank in the line score.
- Can everyone in the squad bat, not just the nine fielding?
- Yes. Turn on Everyone bats in team settings and the whole squad bats in order. With it off, only as many bat as take the field.
- Can I change fielding positions every innings?
- Yes. At the start of each innings you field, LineUp asks you to check who is where. Change any position and it is saved for that innings; the rest carry over.
- Does LineUp keep pitch counts?
- No. It keeps the count of balls and strikes for each of your batters, so it knows a walk and a strikeout, but it does not total a pitcher's pitches.
- Does LineUp show who is on base?
- Yes, while your team bats. Each runner's name sits on their base. When a batter is safe, you say how far they got, and where each runner finished: a base, home, or out.
- Does LineUp send our result to the association?
- No. LineUp keeps the team's own record. If your association asks the team to submit the score, do that as well.


