Tennis Guide

Picking the team for a junior tennis tie: one app for the order and the sheet

How to rank the players and decide who plays each rubber in a junior tennis interclub tie without a notebook, and why parents prefer one app for it across 12 sports.

The LineUp team Published

Free to download today · No ads in the app

Get the app
A girl in a white tennis top and skirt walks onto a club hard court carrying her racquet, the clubhouse behind her

The simplest way to pick the team for a junior tennis interclub tie is to stop working it out on the back of a receipt. Rank the players who are available, let the usual singles and doubles pairings fill themselves in, and change only the rubbers that need changing. LineUp does that on the manager’s phone, and because each rubber’s set scores go in as it comes off court, the tie sheet and the season’s rubbers reach every parent at the end of the tie without a single message being written. This article explains why picking the order and the pairings goes wrong, what a tool for it needs to do, and how LineUp handles it for tennis and eleven other sports in one app.

Why is picking the order and the rubbers the hardest part of managing junior tennis?

Every other job a team manager does has a natural time slot. Replies come in during the week. The draw gets added once. Oranges and the packet of lollies are sorted by the previous player of the day. Picking the order and the rubbers happens on the morning of the tie, often at the courts, with the other club’s captain waiting for your sheet, a parent asking when their child is on and a player who has just said she has a sore wrist.

The tools most managers reach for do not help. A run of messages to the other parents finds out who is free, but not who plays where. A paper sheet needs a pen, a dry clipboard and a free hand. A memory needs a Saturday without incident. The standard result is familiar to anyone who has stood at the fence: a squad player who has not had a rubber in three weeks because no one noticed, a strong one who played two doubles by mistake, and a manager who felt bad about both on the drive home.

Junior tennis makes this harder than it looks. A squad of six or eight, four playing each tie, four singles and two doubles mean the order matters twice. The singles follow the ranking, the doubles pair from it, and most interclub rules allow one doubles each. Change one name and three rubbers move. Each change is a small decision about who has had a turn and who has not, made with incomplete information.

What does a team selection tool for a tennis tie need to do?

Strip it back and a tool for picking a tie has four jobs.

Rank the players who are playing. Not a list you rewrite each week. A ranked order that starts from each player’s usual position, so you only move the ones who are away.

Fill in the usual pairings. The captain should not have to work out that Number 3 plays Singles 3 and pairs with Number 4. The tool proposes the rubbers, and the captain accepts or changes them.

Change a rubber in one tap. If swapping a player takes longer than the warm-up, the tool will be abandoned by the second tie.

Record the result for everyone. The set scores, the rubbers won and who played each one should be saved as part of the tie, not copied into a chat afterwards.

Sometimes a player is hurt or has to leave before their doubles, and it is a nightmare reshuffling the pairs. LineUp allows you to do this in a few taps.

Anything beyond that is nice to have. Anything less than that and you are back to the receipt.

How does LineUp manage team selection for a tennis tie?

LineUp’s setup screen for tennis shows the ranked order at the top and the rubbers under it, and the tie sheet that follows has one row per rubber with the rubbers score above. Everything below happens on those two screens.

The ranked order. Open the fixture and start game day. The setup screen lists the players in ranked order, strongest first. If a player’s usual position on the roster is a ranking, Number 1 to Number 6, the order starts from it. Use the arrows to move a player up or down, or mark them as not playing this tie and bring someone else in. Parents have already told you who is In and who Can’t make it, so this is a matter of moving the names that changed.

The usual pairings. Under the order, LineUp lists the rubbers with the interclub pairings already in. Singles go down the order: your Number 1 plays Singles 1, and so on. Doubles 1 pairs Number 1 and Number 2, and Doubles 2 pairs Number 3 and Number 4. Move a player in the order and the rubbers follow.

One tap to change a rubber. Tap any rubber and pick who plays it: one player for a singles, two for a doubles. If you name someone in two doubles, LineUp points it out, because most interclub rules allow one doubles each. It does not stop you, in case your grade allows it. LineUp suggests the pairings. The captain decides.

A player short. If only three turn up, a rubber can start with nobody named. Fill it in later from the players in today’s order, or leave it, and it counts for nobody.

A player who has to stop. Tap the rubber on the tie sheet, then Change who plays this rubber at the top of the score sheet, and pick from the players in today’s order. A doubles asks for two names before it saves. If a player has to stop part-way through a rubber, LineUp has no retirement result: save the score as it stands and the rubber stays unfinished, so it counts for nobody in LineUp’s tie score. Record the official result the way your association’s rules say.

The tie keeps going. Lock your phone between rubbers, take a call, put it in your pocket. The tie is saved as you go and picks up where it was if the app is closed.

What do parents see, and what do they stop asking?

This is the part of running a tennis team that is easy to forget. The manager’s problem on Saturday is the courts. The parents’ problem is Saturday afternoon, when they want to know how it went, who won and whether their child played singles or doubles.

In LineUp, the tie sheet is the manager’s. Parents see the fixture, the club and their own reply during the tie. When the last rubber comes off, LineUp asks the manager to finish the tie and, if the team picks a player of the day, to choose one. Then it saves the summary: the result in rubbers won and the tie sheet, with every rubber, who played it, the sets, and whether it was won, lost or unfinished.

That same summary is the page a parent opens in their own app a few minutes later. Nobody typed it. Nobody posted it to a chat. The manager’s job ended with the last rubber.

What parents stop asking, in roughly this order: which club, what time, did we win, who did he play with, how did she go. All five are answered on the tie’s page.

Does the score and the stats need any extra admin?

No, and this is the point of keeping the order, the rubbers and the score in the same place. In most teams the manager picks the team one way, keeps the score another and the season’s record a third, if at all. Each one is a separate piece of admin and the last one usually does not survive the season.

In LineUp, tap a rubber when it comes off court, step in the games for each set, and save. LineUp checks the score is one that can happen in your format, so a mistyped 7-3 is caught before anyone copies it anywhere. At one set each, the match tiebreak or a third set appears, depending on your format. The rubbers score at the top counts the rubbers won, with the sets and games each side has won under it.

Because the rubbers and who played them are recorded during the tie, the stats build themselves. On the team screen, Rubbers won lists each player with their rubbers won out of rubbers played, singles and doubles apart. It works as a quiet hint too: a squad player who is not on the list yet has not played a rubber this season. There is no spreadsheet to update on Sunday and nothing to send.

LineUp keeps the team’s own record. If your association uses MatchPoint in New Zealand or Match Centre in Australia, the score your captain enters there is the official one, and the tie sheet is already in front of you, in order, when you do.

Why does one app for 12 sports matter to a family?

Most junior sports families are not one-sport families. The child who plays interclub tennis in summer plays football or hockey in winter. A sibling plays cricket. A parent manages one team and is a sideline parent for another.

Each sport in New Zealand and Australia tends to come with its own system: the federation’s registration platform, a results app for the competition, and whatever the manager chose for the group. A family with two children in three sports can be in six apps and four chats by Christmas.

LineUp runs football, netball, basketball, rugby union, rugby league, touch, hockey, cricket, AFL, water polo, softball and tennis in one app. Each team is set up for its own sport, with its own scoring and its own game-day screen. The football team has a substitution panel. The cricket team has a ball-by-ball scorebook. The softball team has an innings scoreboard. The tennis team has the ranked order, the rubbers and the tie sheet described above. The parent switches between them in the same app, with the same invite-code join and the same In or Can’t make it reply.

For the manager who runs two teams in two codes, that means one way of working all year rather than relearning a new app every season.

How do you set it up before Saturday?

Setup takes about ten minutes and is worth doing in one sitting.

  1. Create the team and choose Tennis. Check players per tie, the number of singles and doubles, and the set format against your grade. Set the team colour and add the club logo if you have it.
  2. Add the squad. Every player’s name, once, with their usual ranking, Number 1 to Number 6, if you have one. Parents attach themselves to these entries when they join, so you do not need any parent details to start.
  3. Add the ties from the draw with the club’s courts and the start time. Add training once and set it to repeat weekly.
  4. Turn on what your team does. Player of the day, snack duty, or neither.
  5. Share the invite code. Paste it wherever the parents already read. Each parent joins, finds their child on the squad, and is done. Children do not have accounts.

How your team gets on LineUp is three steps. From there the fixture reminds people the evening before, and by Thursday you can see who is available.

A few things tennis captains ask

Does LineUp judge anyone? No. It keeps the order you set and the rubbers each player has played. It never ranks a child for you, never tells the captain who deserves a singles, and never shows parents a verdict.

Can two of us run it? Yes. A second parent can manage the team, and whoever is at the courts fills in the tie sheet from their own phone. The season record is the same for both.

Can Sofia play Number 1 this week and Number 3 next week? Yes. The usual ranking on the roster is only where the order starts. Move her in the order on the day and her rubbers follow.

Can I ignore the usual pairings? Yes. Tap any rubber, pick anyone in today’s order, and save. The tie sheet and the season record work the same whether you keep the pairings or not.

If you want the full Saturday walkthrough, How LineUp runs a junior tennis interclub tie covers the order, the tie sheet and a worked example step by step. If you are still choosing an app, Best app for managing a junior tennis interclub team in NZ and Australia sets LineUp alongside MatchPoint, Match Centre, ClubSpark and WhatsApp. Everything we have written about tennis is here. And if you run a club with several junior tennis teams, get in touch.

Questions people ask

What is the easiest way to pick who plays each rubber in a junior tennis tie?
Rank the players who are available, and let the usual interclub pairings fill themselves in so you only change what needs changing. LineUp does this on the manager's phone. Singles go down the order and the doubles pair 1 and 2, then 3 and 4.
Can I change who plays a rubber once the tie has started?
Yes. Tap the rubber, then Change who plays this rubber, and pick from the players in today's order. It works for a singles or a doubles, before the rubber starts or part-way through the tie.
Does LineUp tell the captain who to play?
No. It starts from each player's usual ranking and the usual pairings, and every rubber can be changed. If you name someone in two doubles it points it out, but the decision stays with you.
What happens to a rubber that is not finished?
It counts for nobody in LineUp's tie score. You can save it part-way, such as one set and a game score in the second, and finish it later if it is played out.
Can I use LineUp if my child plays tennis and another sport?
Yes. LineUp runs 12 sports, including football, netball, basketball, rugby union, rugby league, touch, hockey, cricket, AFL, water polo, softball and tennis. Each team sits in the same app and you switch between them.
Is LineUp free?
LineUp is free to download today on iPhone and Android. There are no ads and children do not have accounts.

Related guides

Ready for Saturday

Start with one team and one season. LineUp keeps the fixtures, the replies and game day in one place, so Saturday runs itself.

Download on the App Store Get it on Google Play
Scan to download

Free to download today · iPhone and Android · No ads in the app

A pair of football boots
A whistle on a lanyard
A football
A stopwatch
A rugby ball
A plate of half-time oranges
LineUp home screen with the next game

Get your Team on LineUp

Download on the App Store Get it on Google Play

Free to download today
iPhone and Android · No ads in the app