How LineUp runs a junior tennis interclub tie
A junior tennis tie in LineUp: the ranked order, singles and doubles pairings, set scores entered as each rubber comes off court, and rubbers won at the end.
In LineUp, a junior tennis tie is a ranked order, a list of rubbers with who plays each one, and a tie sheet you fill in as each rubber comes off court. You set the order before the first ball, and LineUp pairs the singles and doubles the usual interclub way, ready for you to change. Each rubber’s set scores go in with a few taps, LineUp checks they are scores that can happen, and the tie score counts the rubbers won. At the end the tie sheet, player of the day and every player’s rubbers are saved to the season.
What does a tennis tie look like in LineUp?
Three screens, in order. The setup, where you rank the players for this tie and check who plays each rubber. The tie sheet during it, with the rubbers score at the top and one row per rubber. And the tie’s summary at the end.
There is no game clock and no point-by-point scoring. A tie is scored set by set, which is what the result sheet holds.
A Tennis team in LineUp defaults to four players a tie, four singles and two doubles, with tiebreak sets. All of that is in team settings:
- Players per tie, from 1 to 6.
- Singles, from 0 to 6, and doubles, from 0 to 3.
- Sets, one of three formats:
- Tiebreak sets: sets to 6 with a tiebreak at 6-all, and at one set each a 10-point match tiebreak decides it.
- Short sets: sets to 4 with a tiebreak at 4-all, and the same match tiebreak at one set each.
- Full sets: best of three sets to 6, with a tiebreak at 6-all.
Formats change from one association and grade to the next, so check yours before the season starts.
Before the tie
The draw is already in. You added the season’s ties once, with the courts as the venue, and any training repeated itself to the end of the season. Each fixture has a map, and families can add it to their calendar.
You know who is available. Parents tap In or Can’t make it on the tie, and LineUp sends a reminder the evening before to anyone who has not replied. With four to pick from a squad of six, that is the part you most need to know by Friday.
Families joined with one code. You shared the invite code from LineUp, and each parent joined with it. Children do not have accounts; you add the player names. How a team gets started takes three steps.
Setting the team up for tennis
If the interclub season has not started, this is a ten-minute job.
- Create the team and choose Tennis. Check players per tie, the number of singles and doubles, and the set format against your grade’s rules.
- Set the team colour and add the logo. The app re-themes to the team colour.
- Add the squad. Every player’s name, once. On each player you can set a usual position, which for tennis is their ranking, Number 1 to Number 6, so each tie starts from your usual order.
- Add the ties from the draw, with the club’s courts as the venue, and add training once as a weekly repeat.
- Turn on what your team does. Player of the day, snack duty, both or neither.
- Share the invite code wherever the parents already read. If another parent is helping, such as the one who drives to the away ties, they can manage the team with you.
A squad is often bigger than the four who play each week. The order starts from each player’s usual ranking, cut to the number who play. Check the In and Can’t make it replies on the tie, then use the arrows to reorder or mark anyone away.
Ranking the players
On the day, open the fixture and start game day. The setup screen lists the players in ranked order, your strongest first. If a player’s usual position on the roster is a ranking (Number 1 to Number 6), the order starts from it. Use the arrows to move a player up or down, mark them as not playing this tie, or bring someone else in.
Interclub results sheets usually want players in ranked order, so the order you set here is the one the singles follow.
Who plays each rubber?
Under the order, LineUp lists the rubbers with the usual interclub pairings already in:
- Singles 1 to 4 go down the order: your Number 1 plays Singles 1, and so on.
- Doubles 1 pairs your Number 1 and Number 2, and Doubles 2 pairs Number 3 and Number 4.
Tap any rubber to change who plays it: pick one player for a singles, or two for a doubles. If you name someone in two doubles, LineUp points it out, because most interclub rules allow one doubles each. It does not stop you, in case your grade allows it.
If you are a player short, a rubber can start with nobody named. Fill it in later, or leave it, and it counts for nobody.
Tap Start the tie and the tie sheet opens.
Filling in the tie sheet
The rubbers score sits at the top: your team, the rubbers each side has won, and the opposition. Under it are the sets and games each side has won across the tie, and how many rubbers are still to finish.
One row per rubber follows: Singles 1, Singles 2 and so on, then the doubles, each with who is playing it for you, the score so far, and a status: Not started, In play, Won or Lost.
Tap a rubber when it comes off court. A score sheet opens with Set 1 and Set 2, each with steppers for your games and theirs. If it is one set each, the decider appears: the match tiebreak for tiebreak and short sets, or Set 3 for full sets. Tap Save score.
LineUp checks the score is one that can happen in your format. A set to 6 ends 6-4 or better, 7-5 or 7-6; a short set ends 4-2 or better, 5-3 or 5-4; a match tiebreak goes to 10, two points clear. If you key 7-3 by mistake, LineUp says why it cannot be and keeps the sheet open so you can fix it.
A rubber still being played can be saved part-way, such as one set and a game score in the second, and finished later. The same sheet has Change who plays this rubber at the top, for a late swap.
A worked example: one Saturday’s tie
Say your team plays four singles and two doubles with tiebreak sets. You rank Ava, Leo, Ruby and Sam, in that order, and keep the usual pairings: Ava and Leo in Doubles 1, Ruby and Sam in Doubles 2.
Singles 1. Ava wins 6-3 6-4. Tap the row, step Set 1 to 6-3 and Set 2 to 6-4, and save. The row reads 6-3 6-4, Won, and the tie is 1-0.
Singles 2. Leo wins the first set 6-3 and loses the second 4-6. At one set each, the match tiebreak appears. He loses it 8-10. The row reads 6-3 4-6 [8-10], Lost: 1-1.
Singles 3 and 4. Ruby wins 7-5 6-2, and Sam loses 2-6 3-6: 2-2.
Doubles 1. Ava and Leo win 7-6 6-4: 3-2.
Doubles 2. The courts close before Ruby and Sam finish. Their rubber counts for nobody, and the tie ends 3-2 to you.
Finishing the tie
Tap Finish the tie, twice. If any rubbers are unfinished, LineUp tells you they count for nobody before you confirm. If your team picks a player of the day, choose them so the award is saved with the result. The tie’s summary shows the result in rubbers won and the tie sheet: every rubber with who played it, the sets, and whether it was won, lost or unfinished.
On the team’s season stats, Rubbers won lists each player with their rubbers won out of rubbers played, and their singles and doubles records apart. A rubber counts as played once it has a score.
LineUp keeps the team’s own record. If your association uses MatchPoint, or another system, for results, the score your captain enters there is the official one.
A few things tennis captains ask
Can I record the opposition’s names? No. Each rubber records who played it for your team only. The other club’s players are their own children.
What if a player has to leave part-way? Open the rubbers they were in, change who plays them, or leave them unfinished.
Does LineUp know the rules of tennis? It knows what a set, a tiebreak and a match tiebreak can end at in your format, and that the tie goes on rubbers. Lets, foot faults and line calls stay on court.
Can two of us run the tie? Yes. Another parent can manage the team with you, so whoever is at the courts fills in the sheet.
If you are still choosing an app, Best app for managing a junior tennis interclub team in NZ and Australia sets LineUp alongside MatchPoint, Match Centre, ClubSpark and WhatsApp.
More on tennis is here, and if you look after a club with several junior tennis teams, get in touch.
Questions people ask
- How does LineUp decide who wins the tie?
- The tie goes to whoever wins more rubbers. A rubber that is not finished counts for nobody. LineUp also shows the sets and games each side has won.
- Which set formats does LineUp support?
- Tiebreak sets (to 6, with a 10-point match tiebreak at one set each), short sets (to 4, with the same match tiebreak) and full sets (best of three sets to 6). Choose one in team settings.
- Can I change who plays each rubber?
- Yes. LineUp starts from the usual interclub pairings, and you can tap any rubber to change who plays it, before the tie or during it.
- Does LineUp enter our result in MatchPoint?
- No. LineUp keeps the team's own record of the tie. The result your captain enters in MatchPoint, or whatever system your association uses, is the official one.
- Does LineUp keep a game clock or score point by point?
- No. A tie is scored set by set as each rubber comes off court, which is what goes on the result sheet.


